Examensarbetets mål var att utforma två förslag på ett musik- och konsthus för placering i Växjösjön. Konstruktionen ämnas vara flytande och mobil.Gemensamt undersökte författarna byggnadens förutsättningar och möjligheter, i syfte att underlätta utformningsprocessen.Författarna utformade var sitt förslag. Det resulterade i två förslag med skilda arkitektoniska särdrag, skapade utifrån gemensamt stipulerade avgränsningar.Det ena förslaget är utformat med hjälp av geometriska former med raka sidor. Det kontrasterar mot det andra förslaget som har organiska och mjuka former..

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

Syftet med vårt examensarbete är att utreda och förbättra Stibas CAD-användning. Stiba är ettbyggkonsultföretag som ligger i Borås. Vi undersökte vilka typer av CAD-program som finnspå marknaden och vad andra liknande företag använder. Vi har valt att studera programmenTekla, Autodesk Architecture och Autodesk Revit, samt ArchiCAD. Då alla programmen ärkomplexa, med i princip oändliga användarmöjligheter har vi bara haft möjlighet att skapa ossen grundläggande översikt.Vi har undersökt Stibas nuvarande användning genom att lämna ut en enkät och intervjua deanställda för att ta reda på deras åsikter och önskemål.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

Det är allt vanligare med 3D-projektering inom byggbranschen för att förbättra och effektivisera bland annat kollisionskontroll, ritningsframställning och mängdberäkningar. 3D-modellering har kommit långt i utvecklingen när det gäller husbyggnad men för mark & anläggningskonstruktion har utvecklingen varit begränsad. Jämfört med traditionella, tvådimensionella CAD-modeller är en tredimensionell CAD-modell uppbyggd på ett annorlunda sätt med objekt istället för ? linjer och streck?. Idag finns det många olika programvaror som erbjuder möjligheten att genomföra 3D-projektering.

Det är allt vanligare med 3D-projektering inom byggbranschen för att förbättra och effektivisera bland annat kollisionskontroll, ritningsframställning och mängdberäkningar. 3D-modellering har kommit långt i utvecklingen när det gäller husbyggnad men för mark & anläggningskonstruktion har utvecklingen varit begränsad. Jämfört med traditionella, tvådimensionella CAD-modeller är en tredimensionell CAD-modell uppbyggd på ett annorlunda sätt med objekt istället för ? linjer och streck?. Idag finns det många olika programvaror som erbjuder möjligheten att genomföra 3D-projektering.

This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

Uppsatsen handlar om hur en äldre byggnad av torp-liknande slag kan renoveras till att bli enbyggnad av modern standard. Detta görs genom att stegvis gå igenom de delar som behöveruppdateras och ge exempel på hur de kan förbättras för att nå upp till en modern standard.Samtidigt har även två modeller gjorts. En i ?Revit Structure? över byggnadens konstruktion,men även en i ?Revit Architecture? där en möjlig ny planlösning ges. Till slut mynnar detta uti ett förlag till ny planlösning som innehåller alla de beståndsdelar som behövs för att skapa enmodern bostad.